Pure Silver Wire is your good choice.The transmission of copper wire to high, medium and low frequency is relatively uniform, but there are many common copper magazines, so it is not suitable to make audio signal transmission lines. Japan used oxygen-free copper OFC more than 20 years ago. Due to the reduction of impurities, the sound tends to be clear and transparent, but it is not good for low frequencies.
Silver Electrical Contacts are mainly used in contactors, switches, connectors, relays, and cross points in conductive circuits. Contact refers to the point of intersection where electronic appliances are disconnected and contacted when they are opened and closed.
The standard scale of rolled Pure Copper Foil is (0.05~0.010) mm (thickness) × (40~600) mm (width), and the length is generally not less than 5000mm when supplied in coils. The conditions are soft and hard, and most of them are hard. Its characteristics are: fine arrangement, uniform function; high surface finish, good public service; single minimum thickness and width are restricted. Rolled copper foil can be divided into oxygen-free copper foil for electron tubes, oxygen-free copper foil and red copper foil according to chemical composition, and corrosion-resistant alloy copper foil with trace elements and heat-resistant alloy copper foil are added.
Following my country's science and technology, many occupations have quickly carried out, especially the hardware profession, next we talk about the characteristics of beryllium copper:
Riveting is to use a metal cylinder or metal tube (rivet) with a slightly smaller diameter than the perforation, passing through the workpiece to be riveted.
China Factory free shipping for Silver inlay copper metal stampings